Embedded Computer Platform

Configurable, Modular, and Cost Effective Single Board Computer

Why buy more than you need? Esterline Interface Technologies integrates our embedded computer solution into your custom device. Get only the features and form factor required for your application. The embedded computer performance and requirements are driven by your specific system function.

Our manufacturing processes accommodate custom configurations in low to medium volumes. Unlike most board level integrators, Esterline Interface Technologies becomes an extension to your engineering department by handing the integration of the user interface hardware. Firmware/software; operating system integration and maintenance; life cycle management of components; product evolution; compliance and reliability requirements.

Features and Benefits

  • Reusable embedded computing platform
  • Configurable to functional, mechanical packaging, and software requirements
  • Tailored for touch user interface applications
  • Cost effective
  • System on Module integration
  • Configurable System on Chip
  • Life cycle management
  • Low to medium product volumes
  • Linux 2.6.23 and Windows CE 6.0
  • ARM Cortex A8 based, TI OMAP 3505 or 3530

System

  • Processor - ARM Cortex A8 based, TI OMAP 3505 or 3530, 600 MHz
  • System memory - 64kb SRAM, 112kB ROM
  • LCD controller - TTL and LVDS built-in
  • Ethernet - 10/100 Base-Tx (1), RS232/422/488 (2), I2C, SPI, GPIO
  • I/O ports - HS USB 2.0 OTG-Host (1), FS USB 2.0 OTG-Host (1), FS USB 2.0 Device (2)
  • Storage disk - 256M NAND FLASH on board/SD card X 1
  • Expansion slot - MMC/SD card support
  • Audio - AC97 Codec, Microphone input, Audio line output
  • Touchscreen - 4, 5 and 8 wire resistive, Surface capacitive, Projected capacitive
  • Operating System - Linux 2.6.32, Windows CE 6.0, Android (future)

Environmental

  • Operating temperature - 0° to 70° C (extended temperature -40° to 85° C available)
  • Storage Temperature -40° to 85° C
  • Humidity - 5% to 90% RH; non-condensing
  • EMC - FCC Class A, When properly integrated
  • POWER SUPPLY - DC Input - 3.3V for CPU, 5V, 12V or 24V for product